Plumbing in Salisbury, MD
Main water line repair, pressure problems and water hammer fixes.

On city water, your main water line runs from the meter to the house; on a private well, it runs from the well and pressure tank. A leak on that line shows up as a soggy patch in the lawn, a hissing sound at the meter box or a sudden jump in your Salisbury water bill.
Call (410) 968-5894 to describe the signs.
Call (410) 968-5894
→
Low water pressure in house plumbing often traces back to a failing pressure reducing valve (PRV), a partly closed valve or corroded supply pipe. On well homes, a waterlogged pressure tank or worn pressure switch causes the same symptom. A PRV that fails open does the opposite and sends high pressure through every fixture.
Testing pressure at a hose bib shows which problem you have.
Call (410) 968-5894
→


Water hammer, the loud bang when a tap or appliance valve closes, strains joints over time. Arrestors and pressure correction usually stop it.
Where the main water line is old or repeatedly leaking, replacement may make more sense than another repair. We cover Salisbury and homeowners searching water line repair in Hebron or Mardela Springs. Call to talk it through.
Call (410) 968-5894
→
Salisbury's 2024 service line inventory listed 15 galvanized lines and 7,528 of unknown material, and residents with those lines were notified by mail. The city plans to replace any lead or galvanized lines over the next ten years. Which part of the line the city handles is set by the city, so check with Salisbury Water Works before work starts.
Not sure where the leak is? Call (410) 968-5894 and we will help you work it out.
Call (410) 968-5894
→


Watch for a wet patch in the yard that never dries, water pooling in the meter box, lower pressure at every fixture and a bill that rises month after month. Shutting off every fixture and checking the meter confirms whether water is escaping. A leak under the lawn usually needs excavation at the leak point or a new line. A break in the street is different: the city maintains its own mains, some of them older asbestos-cement pipe, so report it to the city.
Call (410) 968-5894
→
A wet patch that never dries
A leak on the main line under the lawn.
Water in the meter box
A leak near the meter connection.
Low pressure at every fixture
A leaking main line, a failing PRV or a tired well pressure tank.
Banging pipes
Water hammer when taps or appliances shut off.
01
Test pressure and the meter
Confirm a leak and check the PRV or well pressure tank.
02
Locate the leak
Find where the main water line is failing between the meter or well and the house.
03
Repair or replace
A spot repair at the leak, or a new line where the old one keeps failing.
04
Restore and check
Restore water, check pressure and look for water hammer.
The city installs the water meter. For the line beyond it, confirm with Salisbury Water Works before work starts. On a private well, the line is the owner's.
A failing PRV, a partly closed valve, corroded supply pipe, a leak on the main line or, on a well, a pressure tank problem.
Arrestors near quick-closing valves and correcting high water pressure usually stop it.
Let’s Get It Sorted
Share the details with our team and take the next step.
Call Now
→
Call Today:
Our Service Standard
01
We explain what we find, the options, and the next step before work begins.
02
We handle plumbing repairs with attention to detail so systems work properly after service.
03
We work neatly and professionally, aiming to keep your property clean during the job.

A Few Common Questions
Share a few details about your project and we will help you plan the next step.